Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate (TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl^? and PO₄^3? of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system obeyed the first order kinetic reaction with the apparent rate constant of 0.0025 min^?1 (R²=0.9788). The intermediate products were isolated and identified by gas chromatography-mass spectrometer. The addition reaction of HO? and H₂O and the oxidation reaction with H₂O₂ were found during the degradation pathway of 5 mg/L TCEP in the UV/H₂O₂ system. For the first time, environment risk was estimated via the “ecological structure activity relationships” program and acute and chronic toxicity changes of intermediate products were pointed out. The luminescence inhibition rate of photobacterium was used to evaluate the acute toxicity of intermediate products. The results showed that the toxicity of the intermediate products increased with the increase of reaction time, which may be due to the production of chlorine compounds. Some measures should be introduced to the UV/H₂O₂ system to remove the highly toxic Cl-containing compounds, such as a nanofiltration or reverse osmosis unit.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

基于TMVOC的地下水位波动带苯系物迁移转化模拟

为探究水位波动情况下苯系物的迁移转化规律,提高石油污染场地地下水污染治理精度,以西北某傍河石化场地为研究对象,基于TMVOC模型对特征污染物苯系物开展泄漏模拟,通过情景模拟比较水位波动对苯系物迁移转化的影响,并从污染分布、相间转化等方面,解析地下水位稳定和波动状态下苯系物迁移转化过程差异.结果表明:①TMVOC模型较好地模拟了水位波动状态下苯系物迁移转化过程.②相较于水位稳定状态下,水位波动作用下苯系物污染深度增加0.5 m,污染面积增加25%,总质量增加12 kg.③水位稳定和波动状态下苯系物"气-液-NAPL（Non-Aqueous Phase Liquids）相"占比分别为0.17%、2.03%、97.8%和0.04%、3.69%、96.27%.④NAPL相苯系物饱和度分布与苯系物质量分布呈正相关,水位波动造成NAPL相初始饱和度降低,且初始水位面以下NAPL相饱和度升高.⑤对于苯而言,水位波动状态下非饱和带中苯在液相中的质量是水位稳定状态下的1.11倍,饱和带为10.15倍.研究显示,水位波动显著地影响了苯系物的迁移转化过程,促进了苯系物的溶解,并使更多的苯系物残留在地下介质中.      

达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

特殊区域地表水环境背景值表征技术方法研究与应用

选取黑龙江省源头水保护区作为研究对象,根据DEM数据对保护区内随机布设的水质监测点控制单元进行划分并提取单元内的相关指标建立监测点背景特性量化模型,基于量化结果提出地表水环境背景值监测方案,建立背景值数据库.选取研究区自然属性指标与空间属性指标,以空间叠置技术与聚类分析方法对研究区地表水进行背景值分区,最终将黑龙江省分为六大地表水水质背景值地理分区,并计算了各分区地表水环境背景值表征范围.表征范围显示：依据现行标准进行水质评价,保护区内水质背景值已超出Ⅱ类水质标准限值.因此,基于水质背景值研究成果提出了考虑背景值影响下的水环境质量评价方法,并将方法应用于研究区,结果表明方法切实可行且优于单因子评价法.研究成果可为区域制定背景值影响下的水环境评价方法提供科学的数据支撑与理论依据.     

2-丁烯醛生产废水的臭氧脱毒预处理

CMW（crotonaldehyde manufacturing wastewater,2-丁烯醛生产废水）污染物浓度高、毒性强、直接采用生物法处理难度大.为了降低CMW的生物处理毒性,采用臭氧氧化法对CMW进行脱毒预处理,并通过考察不同臭氧氧化条件对废水COD_Cr、TOC（总有机碳）、UV_{254 nm}去除率及SMA（specific methanogenic activity,比产甲烷活性）抑制率的影响,获得了优化的臭氧氧化条件,进一步分析了废水脱毒机理.结果表明:①优化的臭氧氧化条件为接触反应时间180 min、初始pH 3.0、反应温度35℃、气相臭氧浓度30.3 mg/L,进气流量500 mL/min;并且在该条件下,CMW中COD_Cr、TOC和UV_{254 nm}的去除率分别为19.9%、9.9%和70.6%,主要特征有机污染物[包括2-丁烯醛、（E,E）-2,4-己二烯醛、3-（2-甲基-2-丙烯）-5-戊内酯、1,5-二甲基-1-烯-4-羰基-环氧己烷、山梨酸乙酯等]的去除率在74.4%以上.②厌氧产甲烷毒性试验结果显示,CMW的SMA抑制率由臭氧氧化前的82.0%降至臭氧氧化后的47.2%.③反应动力学研究显示,CMW中COD_Cr、TOC及UV_{254 nm}的去除过程均符合一级反应动力学方程,R2分别为0.82、0.97、0.94.研究显示,臭氧氧化预处理可以较好地去除CMW中的特征有机污染物,降低废水的厌氧生物处理毒性,是一种可行的脱毒预处理方法.      

贵州草海湿地溶解性有机物的光谱特征及其与PFASs的相关性分析

为描述草海湿地DOM（dissolved organic matter,溶解性有机物）荧光特征,探究其对PFASs（per-and polyfluoroalkyl substances,全氟及多氟化合物）环境行为造成的影响,利用超高效液相色谱-质谱联用技术和三维荧光光谱技术,结合平行因子分析,开展DOM光谱学特性研究,分析ρ（DOM）与ρ（PFASs）的相关关系.结果表明:①草海湿地中共解析出3类4种荧光组分,分别为类腐殖酸[λ_Ex（360 nm）/λ_Em（450 nm）]、长波段腐殖质[λ_Ex（400 nm）/λ_Em（510 nm）]、类富里酸[λ_Ex（330 nm）/λ_Em（400 nm）]和类色氨酸[λ_Ex（280 nm）/λ_Em（350 nm）],贡献率分别为48.6%、23.6%、22.9%和4.9%,其中类腐殖质总贡献率高达72.2%.在农业生产和人类活动的影响下,总荧光强度大致呈现从入湖区向出湖区逐渐降低、湖心区略高的趋势.②在草海湿地表层水中共检出了12种PFASs,ρ（PFASs）为233.18 ng/L,每种平均值为19.43 ng/L,PFBA（perfluorobutanoic acid,全氟丁酸）是主要污染物;草海湿地入湖区点源影响特征明显,生活污水和农业生产用水是主要的潜在污染源.③相关性分析结果显示,各荧光组分含量均与ρ（PFBS）（potassium perfluorobutanesulfonate,全氟丁烷磺酸）负相关;类色氨酸含量与ρ（PFHpA）（perfluororoheptanoic acid,全氟庚酸）负相关,与ρ（PFTriDA）（perfluorotrideanoic acid,全氟十三酸）则显著正相关.研究显示,草海湿地水体腐殖化程度高,外源特征明显,共检出12种PFASs,初步揭示了草海湿地水环境中ρ（DOM）与ρ（PFASs）的相关关系,其受水体性质及化合物结构等差异的影响,有待进一步开展深入研究.      

不同居民燃煤炉具大气污染物排放差异性及减排分析

为探究不同类型炉具的大气污染物排放差异,本研究选择5种常见的新式居民燃煤炉具（方型煤炉具、折流换热炉具、炕暖炊一体化炉具、气化正烧及气化反烧炉具）在实验室内进行模拟燃烧和大气污染物排放水平监测,定量评估不同炉具的环境效果,识别污染排放水平差异的影响因素及原因,从而提出炉具研发设计等污染减排的改进建议.结果表明：①不同炉具大气污染物排放差异较大,炕暖炊一体的炉具污染排放强度最大,3种大气污染物（SO₂、NO_x和颗粒物）的排放强度为2.9 kg ·t^-1,是平均值的1.6倍;应用方型煤技术的炉具大气污染物排放强度最低,是平均值的65%.②不同炉具在不同燃烧阶段其气态污染物排放也呈现出明显的差异和特征.旺火阶段方型煤炉具NO_x排放浓度为0.49mg ·m^-3,相较于其他类型炉具降低了45%~72%;气化反烧炉具的SO₂排放浓度为1.38mg ·m^-3,相较于其他类型炉具最高降低了28%.③影响炉具大气污染物排放因素包括应用技术及燃烧类型,采用方型煤及气化反烧技术的炉具环境效益较好,但两类炉具的经济成本分别达到2.0万元和1.8万元,明显高于其他类型炉具.④考虑不同炉具污染排放差异,建议采取差异化的经济政策和严格的排放和产品标准,推广使用节能环保型炉具,降低燃煤炉具大气污染物排放.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.